Piston Air Motors
POWER TRANSMISSIONSAFETY = TONSON

Piston Air Motor

TONSON's patented high precision distinctive radial piston design delivers high torque without high levels of air consumption and air loss as compared to typical vane type air motors. It features:

* 100% Explosion-proof
* Reversible / Stepless Speed Control
* Lightweight
* Low air consumption.
* High torque output
* Easy maintenance
* Flange / Foot / Hub / Metric / Imperial Standard / Custom Mounting
* Easy Maintenance

All TONSON Piston Air Motors are reversible. Dual-shaft, gear reducers, brakes, hand, remote, pendant control available.

OEM, custom design models are accepted.
FEATURES
High Start Torque
Instantly Reversible
Stalling Safety
Positive Start
Rugged Design
Intrinsically safe in hazardous environment (ex. mines, petrochecmical, volatilve atmosphere)
Mounting Flexibility: Flange / Foot / Hub / IEC / NEMA / Custom Mounting Available
Modular Design: All motors may be equipped with gear reducer, brake, hand, remote pendant contro as options.

Air Motors can easily operate under conditions which are unfavorable for
electric, hydraulic, stepper and servo motors.

APPLICATIONS
Hoist / Winches Lifting Devices Mixing Equipment
Pump Drives Choppers / Grinders Mining Equipment


SPECIFICATIONS

air motor M13S-F
M14 Piston Air Motor
M15 Piston Air Motor
M13S
M14
M15

M16 Piston Air Motor
Piston Air Motor M17
Piston Air Motor TONSON
M16
M17
M18

Series
Maximum Output
Max. Speed
Mass
Power
Speed
Torque
Air Consumption
kW
HP
RPM
Nm
ft-lb
l/min
CFM
kg
lb
M13S (110)
1.36
1.82
2000
6.5
4.8
1680
59
2400
13
28.6
M14 (210)
2.8
3.7
1950
14
10.3
4680
165
2400
26
57.2
M15 (310)
6.2
8.3
1800
33
24.3
7925
280
2400
48
105.6
M16 (410)
10.8
14.5
1600
65
48
12000
424
2000
62
136.4
M17 (510)
16.2
21.7
1100
140
103.3
19810
700
1500
125
275
M18 (610)
23.3
31.2
1500
150
110.6
22500
900
2000
125
275
Working Fluid: Compressed Air¡@ Operating Pressure: 6 kg/cm2 Max. Operating Pressure: 7 kg/cm2
Ambient Temperature: -10 ~ +120°C    
Ordering Code

  

M13S-F
M13S-L
M13S-I
M13S-N
Model
M13S-F
M13S-L
M13S-I
M13S-N
Mounting
Flange
Foot
IEC
NEMA
Power (HP / kW)
1.82/1.36
Torque (N-m / lb-in)
6.5/4.8
Speed (RPM)
2000
Air Consumption (l/min / CFM)
1680/59
Mass (kg / lb)
14/31
      

M14-F
M14-L
M14-I
M14-N
Model
M14-F
M14-L
M14-I
M14-N
Mounting
Flange
Foot
IEC
NEMA
Power (HP / kW)
3.7/2.8¡@
Torque (N-m / lb-in)
14/10.3¡@
Speed (RPM)
1950¡@
Air Consumption (l/min / CFM)
4680/165¡@
Mass (kg / lb)
26/57.2
 ¡@ ¡@ ¡@

M15-F
M15-L
M15-I
M15-N
Model
M15-F
M15-L
M15-I
M15-N
Mounting
Flange
Foot
IEC
NEMA
Power (HP / kW)
8.3/6.2
Torque (N-m / lb-in)
33/24.3
Speed (RPM)
1800
Air Consumption (l/min / CFM)
7925/280
Mass (kg / lb)
48/105.6¡@
 ¡@
¡@
¡@

M16-F
M16-L
M16-I
M16-N
Model
M16-F
M16-L
M16-I
M16-N
Mounting
Flange
Foot
IEC
NEMA
Power (HP / kW)
14.5/10.8
Torque (N-m / lb-in)
48/65
Speed (RPM)
1600
Air Consumption (l/min / CFM)
12000/424
Mass (kg / lb)
62/136.4
 ¡@
¡@
¡@

M17-F
M17-L
M17-I
M17-N
Model
M17-F
M17-L
M17-I
M17-N
Mounting
Flange
Foot
IEC
NEMA
Power (HP / kW)
21.7/16.2
Torque (N-m / lb-in)
140/103.3
Speed (RPM)
1100
Air Consumption (l/min / CFM)
19810/700
Mass (kg / lb)
125/275
 ¡@
¡@
¡@

M18-F
M18-L
M18-I
M18-N
Model
M18-F
M18-L
M18-I
M18-N
Mounting
Flange
Foot
IEC
NEMA
Power (HP / kW)
31.2/23.2
Torque (N-m / lb-in)
110.6/150
Speed (RPM)
1500
Air Consumption (l/min / CFM)
25500/900
Mass (kg / lb)
125/275
 ¡@
¡@
¡@

AIR GEARMOTORS
For applications where precise and variable turning power and speed is a requirement. Examples are bolt tensioning equipment or rock drilling rigs, precise lifting, lowering, traversing or turning. Unlike electric gearmotors, no chance of burn-out nor heat buildup
with TONSON Air Motors. Direction of rotation is instantly reversible.
Precise Turning Power, High Torque Capacity
M16-LG

BRAKES
For applications where positive braking is a requirement, a range of caliper brakes is offered.
These are designed to withstand full stall torque of the air motor. The brake consists of two
spring applied shoes pressed against a central hub. The shoes are released by applying air
pressure to the cylinder/piston assembly. The brake torque can be varied by adjustment of
two spring adjusters but it is normally set so that a pilot pressure of 4 bar (60 PSI) will fully release it.

Valve Options (1/2", 3/4", 1", 1 1/4", 1 1/2", 2")
A range of bolt on Hand Control Valves and Remote Control Valves are available for use on all TONSON Piston Air Motors. Designed to completely eliminate all static friction, thereby reducing hysteresis effect and offering a very high degree of sensitive speed control. Suitable for applications where forward and reverse hand control is required, with spring centre to neutral position by a lever mechanism or controlled by air pilot signal..
Two control styles are manufactured:
i) Equal power and speed in both directions
ii) Biased to give a degree of control for hoisting applications.

custom
Hand Control Valve

Custom Hand Control Valve

Remote Control Valve
     
  One pilot port, 1/4" on each end. Caps may be positioned with port at top, bottom or either side. The pilot pressure range is between 1.4 bar (20 psi) and 4.8 bar (70 psi), incresed pilot pressure gives increased speed.






SPECIFICATIONS
Model No. Deceleration ratio
Maximum output
Power
HP
Torque
N.m
Rotation
R.P.M
Air consumption
l/min
M1
1:1
1/8
0.64
1100
204
5:1
1/8
2.84
220
204
10:1
1/8
5.69
110
204
15:1
1/8
8.53
73.3
204
20:1
1/8
11.5
55
204
M2
1:1
1/6
1.0
1000
212.4
M3
1:1
1/4
1.37
900
261
5:1
1/4
5.88
180
261
10:1
1/4
11.8
90
261
15:1
1/4
17.7
60
261
20:1
1/4
23.5
45
261
30:1
1/4
35.3
30
261
40:1
1/4
47.1
22.5
261
50:1
1/4
58.8
18
261
60:1
1/4
70.6
15
261
80:1
1/4
93.2
11.2
261
100:1
1/4
118
9
261
120:1
1/4
137
7.5
261
160:1
1/4
176
5.6
261
200:1
1/4
233
4.5
261
M4
1:1
1/3
2.16
850
269
M5
1:1
1/2
3.0
750
400
5:1
1/2
12.7
150
400
10:1
1/2
26.5
75
400
15:1
1/2
39.2
50
400
20:1
1/2
53.0
37.5
400
30:1
1/2
78.5
25
400
40:1
1/2
106
18.7
400
50:1
1/2
132
15
400
60:1
1/2
157
12.5
400
80:1
1/2
203
9.3
400
100:1
1/2
250
7.5
400
120:1
1/2
300
6.2
400
160:1
1/2
396
4.6
400
200:1
1/2
500
3.7
400
M6
1:1
3/4
4.4
700
425
M7
1:1
1.8
25
500
1000

Model No.
Deceleration ratio
Maximum output
Power
HP
Torque
N.m
Rotation
R.P.M
Air consumption
l/min
M9
1:1
03.5
1.67
1500
450
5:1
0.31
6.86
300
450
10:1
0.31
13.7
150
450
15:1
0.31
20.6
100
450
20:1
0.31
27.5
75
450
30:1
0.31
41.2
50
450
M10
1:1
0.77
3.63
1450
950
5:1
0.69
15.7
290
950
10:1
0.69
31.4
145
950
15:1
0.69
47.1
96
950
20:1
0.69
62.8
72
950
30:1
0.69
94.1
48
950
M11
1:1
1.36
6.57
1450
1750
5:1
1.22
29.4
290
1750
10:1
1.22
58.8
145
1750
15:1
1.22
88.3
96
1750
20:1
1.22
118
72
1750
30:1
1.22
177
48
1750
M12
1:1
3.36
17.5
1350
3700
5:1
3.0
78.5
270
3700
10:1
3.0
157
135
3700
15:1
3.0
235
90
3700
20:1
3.0
314
67
3700
30:1
3.0
471
45
3700
M13
1:1
4.2
21.6
1350
4200
5:1
3.8
98.1
270
4200
10:1
3.8
196
135
4200
15:1
3.8
294
90
4200
20:1
3.8
392
67
4200
30:1
3.8
588
45
4200
1:1
3.7
14
1950
4680
1:1
8.3
33
1800
7925
1:1
14.5
65
1600
12000
1:1
21.7
140
1150
19810
1:1
31.2
150
1500
25500

M1~M4

M5

M6

M7

M9~M11

M12

M13

M14

Hand Control Valve

Remote Control Valve

M17

M18
 
  
     
HEADQUARTER
TONSON AIR MOTORS MFG. CORP.
22 Shu-Yi 1st Lane, Taichung 40256, TAIWAN
TEL: +886-4-2261 1047   Mobile: +886-928 989238   FAX: +886-4-2261 1678
 
GPS: 24¢X07'12.38"  N 120¢X39'25.68" E

CHINA
NeuMek (Shanghai) Corporation
289 Long Lian Rd., Qing Pu District, Shanghai 201702, CHINA
TEL:+86-21 2281 8889   +86-21 2281 7669  FAX:+86-21-3987 9136
Mobile : +86-13917636393 / 13818-336699
  sales@neumek.com

Guang Dong, CHINA
29 San Heng Rd., Ci Bian Xiao Qu, Hou Sa Rd.
Hou Jie Town, Dong Guan 52300, CHINA
TEL:+86-(0) 769 8122 0478   FAX:+86-(0) 769 8122 0479
Mobile : +86-13560848899

Fu Jian , CHINA
12 Building A, Gao Pu Mao Yi Shang Cheng, Xing Lin East Road,
Ji Mei District, Xia Men City, Fu Jian Province, CHINA
TEL:+86-(0) 592 625 9768   FAX:+86-(0) 592 625 9769
Mobile : +86-13779945836

United States
AIR MOTORS TONSON (USA)

AUSTRALIA
TONSON AUSTRALIA Pty. Ltd.
U3, 4 Weld Street
Liverpool Sydney NSW 2177
TEL: +61 (0)2 9600 8881   FAX: +61 (0)2 9600 8882
 
Copyright ©™ 1966 - 2010 TONSON Air Motors